Directory

  • Home
  • Galil Motion Control

Company Profile

Galil Motion Control

Galil, a manufacturer since 1983, offers motion controllers, stepper and servo drives, and PLC's. Galil's motion controllers use a 32-bit microcomputer for handling any application, simple or complex. Modes of motion include point-to-point positioning, linear and circular interpolation, electronic gearing, electronic cam, position following and more.

Company Info

Website
galilmc.com
Address
CA

Entries

  • in Controllers

    Galil offers the Accelera Series of high-speed motion controllers which process commands in 40 microseconds, accepts encoder inputs as fast as 22 MHz, with servo loop updates as high as 32 kHz and available in 1- thru 8-axis models. Their single-axis controllers are designed for single axis or 1 1/2 axis applications and feature uncommitted I/O and Eternet or RS232 port.
    Website

  • in Drives

    Galil Motion Control offers their Accelera and Econo series available in PCI bus and Ethernet/RS232 formats. Model options include plug-in drives for steppers and servos. The Accelera series is available in 1- through 8-axis models.
    Website

  • in Ethernet Controllers

    Galil offers series of controllers with 1 to 8 axis, featuring 10/100Base-T Ethernet/RS232 port up to 115/19.2 kbaud, with configurations for step or servo motors, brush and brushless, up to 500 Watts.
    Website

  • in Motors

    Galil Motion Control offers NEMA 23 brushless servomotors. These servomotors include a 1000 line differential quadrature encoder, a mating 15 or 26 pin high density encoder connector, and a 4 pin Mate-N-Lok power connector (when ordered with a controller). Sizing is NEMA 23 standard.

  • in Power Supplies

    Galil offers PSR power supplies in 24V and 48V, from 100 to 240VAC input at 50 or 60 Hz, coming in a size of 9" x 6.5" x 2".
    Website

  • in Servo Motion Controllers

    Galil Motion Control offers a variety of servo motion controllers, including: Single Axis, Econo, and Accelera Series. CDS-3310 Ethernet/RS232 1-axis motion controllers and drives have the following features: feedback acceptance up to 12 MHz, 8-10 TTL uncommitted I/O, 24V brake drive outputs, connections up to 8 CDS-3310, a 32-bit microcomputer, 500W PWM drives, etc. Modes of motion include: ECAM, electronic gearing, contouring, point-to-point positioning, jogging, etc.

  • in Servomotors

    Galil Motion Control manufactures NEMA 23 brushless servomotors with 1000-line encoder. Designed for precise position and velocity control applications - along with point-to-point applications - the servomotors provide 55 oz-in. of continuous torque, 120 oz-in of peak torque, 4.6 amp continuous current, and 48 volts for 5000 rpm maximum speed.

  • in Single Axis Motion Controllers

    Galil Motion Control offers single axis motion controllers in DMC-1415, DMC-1425, and CDS-3310 configurations. These controllers have digital I/O ranging from 3 to 10, an auxiliary encoder, form-factors up to 5.15" x 8.25", and 37-pin D connectors.

  • in Stepper Motion Controllers

    Galil Motion Control offers a variety of stepper motion controllers, including: Single Axis, Econo, and Accelera. Accelera Series controllers accepts encoder inputs as fast as 22 MHz, process commands as fast as 40 seconds, servo loop updates as fast as 22 MHz, and axis models ranging from 1 through 8. These controllers can handle virtually any mode of motion with ease.