Directory

Company Profile

Baldor

Baldor is a manufacturer of a broad range of electric motors and adjustable speed drives including AC motors, AC controls, DC motors, DC controls, gear products, motion control, servo motors, servo controls, power transmission components, linear products, grinders, buffers and generators used in many industrial applications. Baldor is based in Fort Smith, Arkansas and serves distributors and OEMs in over 70 countries.

Company Info

Website
baldor.com
Phone
479-646-4711
Address
AR

Entries

  • in AC Drives

    Baldor offers: VS1SP AC inverter drives, VS1SD AC servo drives, VS1PM AC permanent magnet drives, and VS1GV AC vector drives. VS1SP and VS1GV drives are available in stock ratings from 3/4 to 500 HP and voltage ranges from 180 to 575 volts. VS1SD drives feature 280-480V 3 phase ratings to 54-27A, and output current peaks up to 228. VS1PM drives feature a NEMA 1 enclosure, and USB 2.0/RS485 ports standard on every drive. Other drives offered include: VS1SP washdown inverter, VS1SD washdown, and VSIGV washdown vector.

    Baldor's Complete V*S AC Drive Series

  • in AC Motors

    Baldor offers AC motors for motion control applications. Motors are available in both NEMA and IEC frame sizing, and motors can get up to 15,000 Hp.

  • in Cables

    Baldor has high-flex cables eith either pre-made connectors or without connectors, including ethernet cables, raw power cables, encoder cables, EnDat cables, and SSI cables, for flex drives, microflex drives, BSM motors, and more.
    Website

  • in Controllers

    Baldor's NextMove controller family includes the ES, a cost effective rack mounted motion controller for the control of up to 6 axes (2 servo and 4 stepper). Available with a USB interface, this provides a high speed interface to the PC. Baldor also offers the e100 which integrates management of real-time Ethernet networks using the industry standard protocol ETHERNET Powerlink. Baldor offers positioners with between 1 and 12 axes of control, incorporating Baldor's Mint programming language.
    Website

  • in DC Drives

    Baldor designs and manufactures two series of DC servo drives. The TSD series operates directly from 115 VAC and provides up to 5 amps continuous. This series also includes protection against over/under voltage, over temperature, excess/surge current, short circuit protection, and loss of logic voltage. The UM/LD series provides 6 amp to 15 amp continuous, with peak currents of 15 and 30 amps, and open chassis, multi-axis configuration.

  • in Drives

    Baldor manufactures AC and DC servo drives. Their DC Servo Drives include totally enclosed  stand-alone units like the TSD series that plugs into 115 or 220 Vac. The UM series typically contains from one to six servo control cards mounted onto a multi-axes chassis containing a power supply. Baldor's MicroFlex e100 is one of their AC servo drives; it integrates  real-time Ethernet, and is available in single phase from 110-230VAC or 3 phase 230VAC operation in current ratings of 3, 6 and 9A.
    Website

  • in Ethernet Controllers

    Baldor's ethernet motion controls utilize EPL's real-time networking performance over a 100 Mbit Ethernet physical layer; up to 16 axes can be interpolated from one motion controller. EPL (Ethernet Powerlink) can support indexing drives also, which allows one motion controller to control dozens of axes.
    Website

  • in Gantry Systems

    Baldor's line of linear stage gantries are designed to speed up and simplify the building of high throughput precision positioning systems. These units feature a custom build XYZ assembly offering moves speeds of up to 2 m/s and resolutions from 50µm to 0.1 µm.
    Website

  • in Motors

    Baldor offers motion control DC and AC motors. DC motors have an integrated microstepping drive, a high torque stepper motor, and come in three frame sizes: NEMA 17, 23, and 34. Torque values range from 22.6 N-cm to 749 N-cm. AC motors come in both NEMA and IEC frame sizes. AC motors are available with up to 15,000 Hp.

  • in Multi Axis Motion Controllers

    Baldor designs and manufactures NextMove e100 multi axis motion controllers capable of performing interpolation on 8, 12 or 16 axes. The controllers can connect more than 200 Ethernet Powerlink devices including drives, I/O and encoders.

  • in Servo Drives

    Baldor is a supplier of motion control products such as servo drive. Servo drive products include AC, DC and DC brushless adjustable speed models. DC servo drives include the UM/LD series featuring up to 6 axis multi-axis servo control, 6 and 15 amp continuous operation, 100 and 150 volt bus, LED status indicators, test points, reset button and chassis mount configuration.

    Baldor's Complete Line of Servo Drives

  • in Servo Motion Controllers

    Baldor offers NextMove e100 servo motion controllers. These controllers can perform interpolation on 8-16 axes, they can coordinate up to 200 ETHERNET compliment drives, and they can handle many machine control functions. They have multiple versatile programming options, including: embedded 'C', multitasking basic, or supplied ActiveX components. Additional features include: 4V/150 mA relay outputs, 12 uncommitted PNP opto-isolated digital outputs, and an Ethernet hub for ease or wiring.

  • in Stages

    Baldor offers a Single Bearing Positioning Stage designed for long-stroke, high-acceleration closed position loop servo applications. It features a moving coil 3-phase cog-free brushless motor with single rail, two integral linear bearings and encoder. Single bearing positioning stages can be stacked on top of each other to provide a multiple axis positioning system.

    Website

  • in Stepper Motors

    Baldor designs and manufactures integrated stepper motors with micro-stepping drives. With operating temperature of -40 to 85C, the motors are suited for machine designers and available in three frame sizes: NEMA 14, 23, and 34. The motors feature torque values of 22.6 N-cm to 749 N-cm.

  • in Torque Motors

    Baldor offers DSMS series high torque stepper motors for motion control applications. The DSMS is available in three frame sizes (NEMA 17, 23, and 34), and it has a maximum torque of 1061 oz-in. The DSMS motor is combined with a microstepping drive, with up to 14 resolution settings from 400 steps to 51,200 steps per revolution.

  • in Variable Frequency/Adjustable Speed Drives

    Baldor makes DC brushless adjustable speed motor control drives with no programming necessary, 200% continuous overload capability up to three seconds, a wide speed range, signal isolation, and reliable Hall sensor feedback.
    Website