Miniature Actuators Category

(10 companies)
State: BC, CA, FL, GA, NC, SC
Country: Canada
  • The Precision Alliance

    The Precision Alliance offers MB15W Series, MB07W Series, FAS Series, MB12W Series, and MB09W Series miniature actuators. MB07W Series miniature linear actuators have normal loading payload capacities up to 47 lbs, lead-screw sizes ranging from 1 to 5mm, 22.5mm heights at the carriage, and travel ranges up to 300mm. These actuators feature NEMA11/2-stack stepper motor configurations, optional 1-2 limit sensors, and applications for tight-fitting spaces.

    Fort Mill
    State: SC
  • E-Motion LLC

    E-Motion LLC offers FA-MS-8-12-8, FA-MS-8-12-6, FA-MS-8-12-4, FA-MS-8-12-2, and FA-MS-8-12-12 miniature actuators for aesthetically oriented and small size applications. These actuators feature zinc alloy housings, a low noise design, drive mechanisms inside the main tube, IP54-rated internal dynamic O-rings, and clevises on both ends for simple attachments. They have closed pin-to-pin lengths raging from 9.9" to 13.9", open pin-to-pin lengths ranging from 9.9" to 29.9", strokes ranging from 2" to 12", and up to 8 lbs of force.

    State: OR
  • Zaber

    Zaber offers T-NA08A50-S, T-NA08A50, T-NA08A25-S, and T-NA08A25 miniature actuators. Model T-NA08A50-S miniature actuators feature CE/RoHS compliance ratings, integrated controllers, precision lead-screw mechanical drives, bi-color power/Com LEDs, and magnetic hall limit/home sensors. These actuators come in travel ranges up to 50.8 mm, accuracies up to +/-8 μm, peak thrusts up to 65N, continuous thrusts up to 50N, and speeds ranging from 0.00022 to 8 mm/s.

    State: BC
  • Firgelli

    Firgelli offers miniature linear actuators for the following applications: planes, boats, compact robots, RC models, toys, home robotics, motion-enabled consumer products, etc. These actuators are versatile, inexpensive, compact, energy-saving, innovative, and cost-effective.

    State: BC
  • Duff-Norton

    Duff-Norton offers micro-miniature actuators in stainless steel and aluminum materials. These actuators feature anti-backlash nuts, actuators up to 1,000 lbs, rated capacities ranging from 500 to 1000 lbs, nominal torque loads up to 2 in-lbs, and a 20:1 worm gear ratio. They are corrosion-resistant, sensitive to adjustments, and easy-to-use.

    State: NC
  • Automation Direct

    Automation Direct offers compact C Series NITRA pneumatic cylinders for a broad range of applications. These cylinders feature a 304 stainless steel body, Buna-N O-rings, high-strength aluminum alloy pistons/end caps, pre-lubricated air cylinders, and roller burnished piston rods. These cylinders come in bore sizes ranging from 9/16" to 3" and stroke lengths ranging from 1/4" to 4"

    State: GA
  • New Focus

    New Focus offers miniature linear actuators for a variety of applications, including: zeroing in on coherence lengths, optimizing the alignment of a laser cavity, or adjusting the point of a beam over a long distance. These actuators have travel ranges up to 11 mm, maximum speeds up to 0.9 mm/s, axial load capacities up to 28N, and drive screw pitch ratings up to 0.3048 mm. They are vacuum compatible up to 10-6 hPa, they can be used for repeatable/absolute positioning tasks, and have the following compact design measurements: 60 mm in length x 30 mm in diameter.

    State: CA
  • Micromo

    Micromo offers miniature servomotor linear actuators for the following applications: valve control, telecommunications equipment, optics devices, photonics devices, medical equipment, X-Y tables, etc. These actuators come in OD sizes ranging from 3.4 to 5.8 mm, reduction ratios ranging from 25:1 to 625:1, pitch ratings ranging from 0.2 to 0.25, and screw diameters ranging from 1.6 to 2.5. They are capable of providing rapid motion, precise positioning, and a long service life.

    State: FL
  • T.E.A. Machine Components

    T.E.A. Machine Components offers miniature actuators for a variety of applications. These actuators come in lengths up to 5", lifting capacities up to 359 lbf, strokes up to 300 mm, and spindle lengths up to 39.3". They have stroke speeds ranging from 5 to 20 mm/sec, voltages ranging from 0 to 24V DC, and ratios ranging from 12:1 to 50:1.

    State: VA
  • miniature actuators come in a stroke range of 1" to 40"; speeds of 0.59"/sec or 1.18"/sec; and 15 lbs, 50 lbs, or 150 lbs of force. These 12V actuators are a full 2" smaller than comparable standard linear designs.

    Los Angeles
    State: CA